014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-complete-installatie-voor-montage-op-een-tank for the inspection and the

for the inspection and the re-establishment of tyre pressure through the inflating gun with gauge scale 0x10 bar

AdBlue set bestaande uit: Pomp met 12V aansluiting

Suitable for different type of oils

differential gears

The delivery capacity of a pump varies according to particular applications and combinations: the pressure of air supplied

014-1064-050 - Follower plate for industrial pumps with shank 50 mm subgroup-complete-installatie-voor-montage-op-een-tank for the inspection and theIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.